Merck Millipore AP4004705 Cam Elyaf Filtre Kağıdı 500 Adet / Paket

Millipore ap 40 fibröz disk filtrelerin akış hızları ve verim kapasiteleri çok geniş bir yelpazededir. Cam elyaf filtreler bağlayıcı reçine ile ya da reçinesiz kullanılabilir ve EO, gama veya otoklav (1 bar az 121 °C) ile sterilize edilebilir. Çoğunlukla ön filtrasyon ve kirlilik analizleri için kullanılır.

Paket / Miktar : 500 adet

Kimya Yapısı : Cam elyafı

Su Akış Yapısım : 6 mL/dak x cm²

Filtre Türü : Derinlik filtresi

Max. Çalışma Sıcaklığı : 550 °C

Gözenek Büyüklüğü : 0.7 mikron

Islanabilirlik : Hidrofilik

Filtre Çapı : 47 mm

Filtre Kod : AP40

Filtrasyon Cihazı ve Aksesuar Türü : Filtre diskler / levhalar

Filtre Renk : Beyaz

Ürün Adı : Cam elyaf filtre

Filtre Yüzeyi : Düz Gözeneklilik % : 90

AP4004705 Millipore Glass Fiber Filter without binder 0.7 µm pore size, hydrophilic glass fiber, 47 mm diameter

Description

Catalogue Number

AP4004705

Description

Glass Fiber Filter without binder

Background Information

Overview
Millipore fibrous disc filters are available in a wide range of flow rates and throughput capacities. Our Glass Fiber filters are available with or without binder resins and can be sterilized by EO, gamma, or autoclave (121 °C at 1 bar).Glass Fiber Filters with Binder Resin:
Millipore filters with binder resin have superior wet strength and are excellent for qualitative analysis and prefiltration, especially for heavily contaminated liquids. They are also widely used for clarification of aqueous solutions.Type AP15
•Lowest dirt-holding capacity
•Recommended prefilter for 0.2 to 0.6 µm filters

Type AP20
•Lower retention, higher dirt-holding capacity than AP15 filters
•Recommended prefilter for 0.8 to 8.0 µm filters
•Use upstream to protect type AP15 filters

Type AP25
•Added thickness yields same retention and greater dirt-holding capacity as AP20
•Recommended prefilter for 0.9 to 8 µm filters, especially for proteinaceous and heavily contaminated liquids
•Use upstream to protect type AP15 filters

Glass Fiber Filters without Binder Resin:
The filters without binder resin retain their structural integrity without weight loss when heated up to 500 °C and can therefore be used in gravimetric analysis as well as for the filtration of hot gases.

Type APFA
•Retains fine particles with good efficiency, even at high flow rates
•Recommended for monitoring wastewater and collecting suspended particles in gases (e.g., fumes from chimneys)
•Use in biochemical applications (e.g., collection of cells and filtration of protein or nucleic acid precipitates)

Type APFB
•Higher mechanical strength when wet and greater loading capacity than type APFA filters
•Use for liquid clarification, quantification of solids in suspensions of fine particles, and scintillation counting

Type APFC
•Greater retention, especially for fine particulate and microorganism removal than type APFA filters
•Use for determining total suspended solids in drinking water
•Use for filtering proteins or nucleic acid TCA precipitates and for collecting cells and microorganisms

Type APFD
•Thick filter with high flow and low retention
•Use for clarifying suspensions containing particulates greater than 1.0 µm

Type APFF
•Use for filtering extremely fine precipitates such as protein, nucleic acids, or serum precipitates
•Recommended for USEPA method 1311 for TCLP analysis

Type AP40
•Recommended for Standard Methods Total Suspended Solids 2540D
•Recommended for USEPA method 1311 for TCLP analysis
•Maintains structural integrity without weight loss when ignited to 550 °C (1022 °F) after sample filtration
•Recommended for determining volatile suspended matter in wastewater and industrial effluents

Product Information
Filter Code	AP40
Filter Color	White
Maximum Operating Temperature	550 °C
Filter Type	Depth filter

Applications
Application	0.7 µm pore size, hydrophilic glass fiber, 47 mm diameter

Biological Information
Wettability	Hydrophilic

Physicochemical Information
Pore Size	0.7 µm
Porosity %	90%
Water Flow Rate	>300 (mL/min x cm²) at 27 in Hg

Dimensions
Filter Surface	Plain
Thickness	475 µm
Filter Diameter (⌀)	47 mm

Materials Information
Chemistry	Glass Fiber

Packaging Information
Material Size	500 pack, AP40, 47 mm

Büyük resim göster

Ürünlere geri dön

MERCK Millipore AP4004705 Cam Elyaf Filtre Kağıdı

13.774,00 ₺

K.D.V. ve Kargo Dahildir.

Karşılaştır

Listeme ekle

Kategoriler: Laboratuvar Sarf Malzemeleri

Açıklama
Değerlendirmeler (0)

Açıklama

Product Information
Filter Code	AP40
Filter Color	White
Maximum Operating Temperature	550 °C
Filter Type	Depth filter

Applications
Application	0.7 µm pore size, hydrophilic glass fiber, 47 mm diameter

Biological Information
Wettability	Hydrophilic

Physicochemical Information
Pore Size	0.7 µm
Porosity %	90%
Water Flow Rate	>300 (mL/min x cm²) at 27 in Hg

Dimensions
Filter Surface	Plain
Thickness	475 µm
Filter Diameter (⌀)	47 mm

Materials Information
Chemistry	Glass Fiber

Packaging Information
Material Size	500 pack, AP40, 47 mm

Değerlendirmeler (0)

Değerlendirmeler

Henüz değerlendirme yapılmadı.

“MERCK Millipore AP4004705 Cam Elyaf Filtre Kağıdı” için yorum yapan ilk kişi siz olun

3000 TL Üzeri Ücretsiz Kargo

MERCK Millipore AP4004705 Cam Elyaf Filtre Kağıdı

Merck Millipore AP4004705 Cam Elyaf Filtre Kağıdı 500 Adet / Paket

Değerlendirmeler

200 µL Universal Fit Steril Pipet Uçları (Kutu ile birlikte)

AZ 833PAZ EC Yedek İletkenlik Probu

Borox pH Kağıdı (pH 0 – 14)

Döner Plastik Pipet Standı

Imhoff Hunisi Standı

ISOLAB Balon Joje P.P 1000 ml

MERCK Ph Kağıdı 0 – 14

Mühürlenebilir Su Numune Şişesi 500 ml (Polietilen,Steril A)

MERCK Millipore AP4004705 Cam Elyaf Filtre Kağıdı

Merck Millipore AP4004705 Cam Elyaf Filtre Kağıdı 500 Adet / Paket

Değerlendirmeler

İlgili ürünler